top of page



Bench Model: ____ Full, ____ Square-Dip, ____ Curved-Dip, ____ Corner Set

Category: All include Design Consult with Schematic Rendering, Iron & Welded Bases,      basic Upholstering, Extensive Choice of Leathers, Oak Skirting, Painted Iron  

  • ___ CLASSIC: 5/8" straight balusters, ~7.5 wide seat, welting trim 

    • Starting @ $4,000 up to 72" X 20"​

  • ___ PRESTIGE: Mix of 3/4" straight & 5/8" twisted balusters, ~8.5" wide seat, welting, tacks 

    • Starting @ $5,000 up to 72" X 20"

  • ___ SIGNATURE: Mix of 1" & 5/8" twisted balusters, ~9.5" seat, button tufted, welting, tacks ... these are typically large, very heavy and impressive benches 

    • Starting @ $6,500 up to 72" X 20"

  • ___ COUNTRY CLUB: all the above + custom baluster mix + more per Design Consult ... these are our largest, heaviest and most impressive benches 

    • Our most expensive benches​

  • ___ NYC Edition: One Size 60" X 16" Full or S-Dip model w Prestige features (fits 14.5" hearth) ... sized to fit smaller fireplaces typical of NYC brownstones and co-ops ... new 2024 for Tri-St area.  

    • Starting @ $4,000 with Prestige baluster mix

Placement: ____ ON-hearth, or ____ OFF-hearth, or ____ Transitional (requires hearth flush w floor)

Hearth: Front Length ______ (exclude any coping), and _____ available hearth depth

Fireplace Spread: ______ = Firebox width _____ + 2x Fascia ____ + 2x Mantel Stile _____

Preference: corner-to-corner Seat Length _____, Seat Depth _____, Seat Width ____ (6" to 9")

Required Client Info:

Client's Name: __________________________________________

Project Address: _________________________________________

Primary Contact: ________________________________________ 

Cell Phone: ____________________, ________________________

Email: ___________________________ 

Design Consult: we'll discuss and do a schematic rendering of your F/P and Bench. To start, we require above information and several pictures of your fireplace up-close and from a 45-degree angle showing details of hearthstone-floor area and stiles (features surrounding the firebox. As needed, I'll guide you through detail measurements via phone, face-time, your photos; we do this for clients all across America.


Notes on Features, Options & Customization

Our Frames: solid iron, forge welded, clear-coat finish, shot-gun grey or custom painted. 

Consider the following design features: some included in base price, some will be extra.

  • Custom Ironwork Design: We'll work from your sketch or photo.

  • Custom Baluster Spacing: customize the pattern; we'll play with this in Design Phase. 

  • Twisted Balusters: an impressive design element … center twist or full baluster twist. 

  • Extra Balusters: a high value feature that narrows gap spacing.

  • Choose a Designer Fabric 

  • Button Tufting ... requires material thin enough to make buttons.

Upholstering (basic) is included in price: we use top design trade upholsterers.

For Contemporary: Choose a designer fabric, tufted top, nail-heads, welting, etc. 

Leather: choose from our vendor (hundreds of choices) or

"Client's Own Material" - leather, fabric, vinyl, kilim, etc. with "COM" price credit. 


Oak Skirt: standard is 3.5" x 3/4" with an ogee routed top edge and dark stain.  

In lieu of the oak skirt, we can add a 'plinth' design element to the baseplate.


Have a fireplace in the Master Suite or Dining Room?  A club fender will add  function, design and relevance for all seasons … fire burning or not.


Club Fenders also make a wonderful commemorative: alumni class gift, memorable corporate recognition, private golf clubs, landmark buildings, etc. 

Log Caddie: we can use your extra selected leather (6 sq ft needed) to make a log carrier. 

bottom of page